SilverCrest 379523 2110 Mode D'emploi page 22

11) As soon as the "Espresso" control lamp t lights up continuously, press the
"Espresso" button
Allow the water to run through completely. Carefully pour out this water.
12) Repeat steps 10 to 11 once and then turn off the appliance.
13) After descaling, wipe off the appliance with a damp cloth to remove any
splashes of the descaler solution. Ensure that the appliance is completely dry
before the next use.
You can order more descaler s via our customer service (see section "Ordering
replacement parts").
We recommend using the descaler s supplied with the appliance. You can also
use other commercially available descaling agents for espresso machines. If you
do so, proceed as described in the operating instructions of the respective descaler.
Ordering replacement parts
You can order replacement parts for this product on the Internet at
www.kompernass.com.
NOTE
► If you have problems with your online order, you can contact our service
centre by phone or e-mail.
► Please always quote the article number (e.g. IAN 123456_7890) when
ordering. You can find it on the title page of these operating instructions.
► Please note that online ordering of replacement parts is not possible for all
countries.
SEM 1100 D3
3.
Scan the QR code with your smartphone/tablet.
You can use this QR code to go directly to our
website to view and order the available spare parts.
GB │ IE │ 19 ■