EN
11
Opening and closing the cover
11.1
Opening the cover
The cover can only be opened if the centrifuge is switched on and the rotor is stationary.
If this shouldn't be possible, see the "Emergency unlock" chapter.
When the cycle counter is activated, after a centrifugation run, while opening the cover, the remaining
number of running cycles (centrifugation runs) is briefly displayed.
Example:
RPM
>RCF<
t/min:s
Press the key.
STOP
OPEN
The cover is unlocked by the motor.
: Cover unlocked.
11.2
Closing the cover
Do not reach with your fingers between the cover and housing.
Do not slam the cover closed.
Put the cover on and lightly press the front
edge of the cover down.
The cover is locked by the motor.
: Cover locked.
46/129
Example:
>RCF<
RPM
t/min:s
Example:
RPM
>RCF<
t/min:s