Inlet temperature
Bypass ON
Unit state
Switch-on
and switch-off
Unit mode:
Manual Operation or Program
(on time slots)
Schedule
Manual
Unit mode
9.2.3 Hourly programming
Selecting the "Program" button takes you to the day programming setting screen. IT is possible to set different time slots for each day
of the week for each operating speed and the "pause" time slot during which the appliance stops. To delete a program, click above
the time slot and click on "Delete". Click on the "copy" button to copy the settings for a certain day of the week to the day selected in
the drop-down menu. Confirm the programming made by pressing the "Accept" button. Cancel the change with the "Reset" button.
work modes
pause
1
Monday
0:00
1:00
2:00
3:00
Tuesday
0:00
1:00
2:00
3:00
Wednesday
02:00
0:00
1:00
2:00
3:00
Note: To return to manual mode, select "Manual" via the "Unit mode" button on the "Home" page or manually operate the
speed selection buttons on the remote control panel (refer to paragraph "9.1 Remote control panel").
Exhaust temperature
Supply temperature
Manual
MIN
Unit mode
Current gear
Current speed
(1^ / 2^ / 3^)
MIN
MED
2
Copy
4:00
5:00
6:00
7:00
8:00
9:00
Copy
4:00
5:00
6:00
7:00
8:00
9:00
Copy
4:00
5:00
6:00
7:00
8:00
9:00
Supply air filter - depletion
Extraction temperature
Holiday mode
Comfort temperature
This is the setpoint temperature for bypass.
Holiday mode (if selected, the appliance runs for
30 minutes at speed 2, then runs at a speed 30%
lower than speed 1, up to the set lower limit)
Delete
MAX
3
10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
09:00
10:00 11:00 12:00 13:00 14:00 15:00 16:00 17:00 18:00 19:00 20:00 21:00 22:00 23:00
0 %
0 %
Extracted air filter - depletion
23°C
Temperature of comfort
Hourly programming
One of three operating speeds can
be set for each day of the week
and for each desired time slot.
Supply
Extract
ENGLISH
Schedule
53