Publicité
Les langues disponibles
Les langues disponibles
9
Use
"VORT HRI PHANTOM BP IoT" can be controlled via:
• Remote control panel (with limited functions).
• Via cloud by accessing www.vorticenet.it or from the "VorticeNET" app via Wi-Fi connection.
• Via Bluetooth connection using the "VORTICE MVHR" app.
9.1
Remote control panel
LED
ALARM
LED
WiFi
BUTTON AND LED:
• ON/OFF SELECTION
(short press)
• OPERATION SELECTION
BLUETOOTH / Wi-Fi
(long press)
ON/OFF BUTTON
: A single press switches the appliance on or off. Each time the button is pressed the LED will light up once
and then switch off. When the machine is running, the LED displaying the set speed will light up.
A long press (approx. 4s) switches between Bluetooth and WiFi connection.
WiFi LED
:
• If the LED is steady, the appliance is connected to the WiFi network.
• If the LED is flashing slowly, the Wi-Fi connection has been lost.
• If the LED is flashing quickly, the connection mode is Bluetooth.
ALARM LED
If lit (steady), an anomaly is in progress.
SPEED BUTTONS AND LED
The buttons are used to select one of the three appliance speeds. The three LED display the set speed when the appliance is
switched on.
NOFROST LED
If lit (steady), the appliance is in nofrost mode.
BYPASS LED
If the LED is lit (steady), the appliance is in bypass mode.
MANUAL/ PROGRAM OPERATION BUTTON AND/ LED
Pressing the button alternately selects the two operating modes.
• If the LED is off, the appliance is in MANUAL mode.
• If the LED is lit (steady), the appliance is operating in "Program" mode, i.e. in a certain time slot at the set speed. Please note: if the
LED is flashing, the appliance is in an unprogrammed time slot ("pause" time slot; please refer to paragraph "9.4.3 Programming").
When the appliance is again in a programmed time slot, the LED will be steady.
Please note: Neither Boost mode nor Holiday mode can be set via the remote control panel. It is also not possible to program
time slots. To activate these functions and program time slots, the appliance must be controlled via the "Vorticenet" cloud
(Wi-Fi connection) or from the "VORTICE MVHR" app (Bluetooth connection).
BUTTON AND LED
FOR
OPERATION
SELECTION MANUAL/
SCHEDULE
SELECTION BUTTONS
APPLIANCE SPEED
Display LED
for set speed
LED NOFROST
LED BYPASS
ENGLISH
51
Publicité
