Vortice VORT HRI 200 PHANTOM BP IoT Notice D'emploi Et D'entretien page 49

8.2 V ia the Vorticenet Cloud
1. Power the appliance. The Wi-Fi LED on the remote control panel flashes. The appliance must be in Bluetooth mode (the
on the remote control panel must flash quickly. If the LED is steady, please refer to paragraph 9.1 to switch to Bluetooth mode).
2. Open the "VorticeNET" app.
3. Press the "Add" button.
4. From the "VorticeNET" app, choose installation mode BT* and follow the instructions on screen.
Choose installation
Scegli il dispositivo
Filters
Internet gateway
Add Dispositivo:
1006859209
FN:
Impostazioni del gateway internet
Add your first installation to start with
Processo di installazione del cloud VorticeNET
VorticeNET
Nome del dispositivo:
Impostazioni del gateway internet
Controllore della ventilazione
FN:
1006930839
Nome del dispositivo:
produttore:
Controllore della ventilazione
Vortice
FN:
1006930839
produttore:
Vortice
*Note: if you choose manual installation, you will also need to access the 'VORTICE MVHR' app (in BT mode) to get the
serial number and password. With the 'VORTICE MVHR' app open, start scanning and select "Internet gateway settings"
and ">Get VORTICE MVHR password". Reopen the VorticeNET app, assign the installer a name and enter the serial number
and password.
5. Follow all the steps indicated in the VorticeNET app through to giving the installation a name. On the Wi-Fi configuration screen,
select "YES" and enter the SSID (network name) and the password for the Wi-Fi network you are connecting to.
Choose installation
Add new installation
Set the installation name
Name:
VORT HRI 200 PHANTOM
Add
Choose installation
Filters
Add
Add new installation
Choose how to add the installation:
BT
Manual
Choose installation
Filters
Add
WIFI configuration
vortice
Accept Accept
Choose installation
Filters
Add
BT connection
Search for devices
Name:
web gateway
Serial number:
1006859209
ENGLISH
LED
Choose installation
Filters
Add
BT connection
Device found:
1006859209
Next
49