Vortice VORT HRI 200 PHANTOM BP IoT Notice D'emploi Et D'entretien page 50

ENGLISH
6. The device will automatically switch to Wi-Fi mode. The following message is displayed: "Installation is complete. The internet
gateway has switched to Wi-Fi mode". Press the "Ok" button.
*Note: if the led corresponding to the WiFi icon on the remote control panel is not steady, press the on/off button again for
a few seconds (approx. 4s) to connect the system to the WiFi network.
7. Press "Open" to open the system and select "new installation component" to add a device to the installation list.
8. Select the "ventilation controller" button in the "Connected components" window and press the "Accept" button.
Choose installation
Filters
Add
Installation name: Serial number :
1006859209
VORT HRI 200 PHANTOM
Address: State: Connection :
No alarms online
Open
9. The configuration is ready when the windows of both the ventilation controller and the web gateway appear.
online
1006930839
Producer Software
Vortice S001.10
ventilation controller
50
new installation component
Add the first device.Click the button
to add devices to the list
Hardware
H001.33.098
Inistallation settings
Installation components Add
online
Component attachment
Serial number Software
1006930839
ventilation controller
Accept
Street
Building number
Apartment
Zip-code
online
WIFI quality:
1006859209
Producer Software
Vortice S002.06
web gateway
Hardware
H1.0.0