Vortice VORT HRI 200 PHANTOM BP IoT Notice D'emploi Et D'entretien page 43

8 Initial configuration
8.1 C onfiguration via the VORTICE MVHR app (via Bluetooth)
After connecting to the appliance, power the appliance and activate Bluetooth on your device. The LED with the connectivity icon
on the remote control panel will start flashing continuously and quickly**.
Note: The first time you open the "VORTICE MVHR" app, select "user" from the user-type selection screen.
** If the LED on the remote control panel is steady, press the
to Bluetooth mode (flashing LED). Refer to paragraph "9.1 Remote control panel" a pagina 51 for a detailed description of the
buttons on the remote control panel.
8.1.1 Language and temperature measurement unit selection
1. Open the "VORTICE MVHR"
app, click "Start scan" and start
the scan.
Device choice
Start scan
4. Select the desired settings.
App settings
App theme
Dark
Bright
App language:
Température de l'unité: Temperature unit:
2. Press the settings icon " ".
5. Return to the previous screen
by pressing the "<" button.
System
dependent
button for a few seconds to switch from Wi-Fi mode (steady LED)
Device choice
device name:
Internet gateway
FN:
1006859209
MAC:
B8:D6:1A:A5:A8:DE
App settings
App settings
App information
ENGLISH
3. Select the "App Settings" button.
App settings
App settings
App information
43