Vortice VORT HRI 200 PHANTOM BP IoT Notice D'emploi Et D'entretien page 48

ENGLISH
8.1.8 Possible firmware update on the motherboard
1. Select the "Internet
gateway" button.
Device choice
device name:
Internet gateway
FN:
1006859209
MAC:
B8:D6:1A:A5:A8:DE
5. Enter the software update password 0874.
6. Press the "Find and add software file" button.
7. Select the file with the extension ".pfi".
8. Press "Start the update process"
9. Select the file and press "Update software"
10. The gateway is disconnected at the end of the update.
8.1.9 Possible uploading of Snapshots
Snapshots are configuration files that define the default values of parameters (e.g. motor speed, active
pre-heater, etc.).
Repeat steps 1 to 3 of the previous paragraph "Possible firmware update on the motherboard".
4. Press "Configuration snapshot" (as shown in the screen opposite).
5. Enter the password: 0896.
6. Press "Snapshot import" and import the necessary installer files.
7. Press the "Snapshot uploaded" button on a white background.
8. Select one of the snapshots and confirm the start of the upload process by pressing the "Snapshot
uploaded" button on the green background.
9. Repeat steps from step 7 with the other snapshot type.
48
2. Press the "Ventilation
controller" button
Selected device
Device: Internet gateway
FN: 1006859209
Internet gateway settings
Internet gateway settings
VorticeNET Cloud installation process
device name: device name:
Internet gateway settings
Ventilation controlle Ventilation controller
r
FN: FN:
1006930839
1006930839
device name:
producer: producer:
Ventilation controlle
r
Vortice
Vortice
FN:
1006930839
producer:
Vortice
3. Press the "Gear"
icon at the top right of
the screen.
Selected device
Ventilation controller
Device:
1006930839
FN:
User settings
Service settings
Schedule
4. Press the "Software
update" button.
Advanced settings
Software update
Software update
Configuration snapshots
Configuration snapshots
Advanced settings
Software update
Software update
Configuration snapshots Configuration snapshots