Publicité
Les langues disponibles
Les langues disponibles
MOTOR TRANSPORTING
When transporting the motor, place the motor
either vertically or horizontally.
Vertical transport:
Attach the motor to the carrier by securing
clamp bracket with two clamp screws.
Never use display stand for transportation of the
motor.
Horizontal transport:
1. Drain the gasoline from the engine fuel line.
Refer to the MOTOR REMOVAL section.
2. Raise the tiller handle and rest the motor on
a case protector with the port side down-
wards as shown.
54
WARNING
Spilled fuel or fuel vapor can cause a fire
and is hazardous to health.
Always take the following precautions:
• Drain the fuel from the fuel line and fuel
vapor separator before transporting the
boat/outboard motor and before remov-
ing the motor from the boat.
• DO NOT lay motor on its side without
draining fuel.
• Keep the motor away from open flames
or sparks.
• Wipe up spilled fuel immediately.
NOTICE
If you do not take proper precautions
when transporting your outboard, it can
be damaged.
• Do not rest the engine in any of the
positions shown below, as water and
oil may enter the cylinder through the
exhaust port or the outer casings may
be damaged.
• Do not place the engine on its side
before the cooling water has drained
from it completely, as water may enter
the cylinder through the exhaust port
and cause problems.
INCORRECT
Publicité
