Publicité
Les langues disponibles
Les langues disponibles
3. Remove the NSI cable 1 from the recoil
starter.
4. Pull the breather hose 2 out from hose
clamp on the recoil starter.
5. Disconnect the evaporation hose 3 from the
vapor separator.
6. Remove the four bolts securing the recoil
starter assembly in place.
7. Lift the recoil starter assembly and roll the
port side. Reconnect the evaporation hose
3 to the vapor separator.
8. Secure the recoil starter assembly with the
suitable rope as shown.
45
Publicité
