Suzuki DF9.9B Manuel Du Propriétaire page 32

TILT UP LOCK ARM
The tilt up lock arm is used to hold the motor in
the fully tilted up position.
 WARNING
If you place your hands near the mount-
ing bracket or under the motor when tilt-
ing it, your hands can be crushed if the
motor slips from your grasp.
Never place your hands near the mount-
ing bracket or under the motor when tilt-
ing it.
To hold the motor in the fully raised position:
1. Shift into "NEUTRAL".
2. Move the tilt lock lever 1 to the "release"
position.
3. Grab the handle on the back of the motor
cover and tilt the motor all the way up until it
is automatically locked in the fully tilted up
position by the tilt up lock arm 2.
30
NOTICE
If you use the throttle grip handle to raise
or lower the motor, the handle may break.
Never use the throttle grip handle to raise
or lower the motor.
To lower the motor back down:
1. Move the tilt lock lever 1 to the lock position.
2. Pull the motor slightly towards you and
slowly let the motor down.
 WARNING
If you do not take proper precautions
when tilting up the motor, fuel may leak
out.
Disconnect the fuel line whenever you
leave the motor tilted up for a long period
of time.