Publicité
Les langues disponibles
Les langues disponibles
Avoid Personal Injury. Carefully read, understand and follow the warnings and instructions given in this manual.
This manual is an essential part of the product. Keep it with the machine in a safe place for future reference.
5. If tires being mounted require more than the tire manufacturer's maxi-
mum bead seating pressure and , the wheel should be removed from
the tire changer, placed in an inlation cage, and inlated per manufac-
turer's instructions
6. The use of inlation devices (e.g. guns) connected to power sources
outside of the machine is not permitted
7. Never place your head or any part of your body over a tyre during the
inlation process or when attempting to seat beads. This machine is not
intended to be a restraining device for exploding tyres, tubes or rims.
8. Always stand back from the tyre changer when inlating, never lean
over.
An exploding tyre and rim may be propelled upward and outward with enough force to cause
serious injury or death.
Never mount any tyre unless the tyre size (molded into the sidewall) matches the rim size
(stamped into the rim) exactly or if the rim or tyre are defective.
Never exceed the tyre pressure recommended by the tyre manufacturer.
This tyre changer is not a safety device and will not restrain exploding tyres and rims. Keep the
area clear of bystanders.
9. Crushing Hazard. Moving Parts Present. Contact with moving parts could
result in an accident.
• Only one operator may work with the machine at a time.
• Keep all bystanders clear of tyre changer.
• Keep hands and ingers clear of rim edge during the demounting and
mounting process.
• Keep hands and ingers clear of mount/demount head during operation.
• Keep hands, feet and other body parts away from moving parts.
• Do not use tools other than those supplied with tyre changer.
• Use proper tyre lubricate to prevent tyre binding.
• Pay attention while moving tyre/rim or lever.
10. Electric Shock Hazard.
• Never hose down or power wash electric tyre changers.
• Do not operate the machine with a damaged power cord
• If an extension cord is necessary, a cord with a current rating equal to or
greater than that of the machine must be used. Cords rated for less current
than the machine can overheat, resulting in a ire.
A9222 HP TI - A9222 TI - A9824 HP LL - A9824 HP User Manual
WARNING
DANGER
9
Publicité
