PROBLEM
Vertical slide lifts off too
much or too little from
the rim.
Rim rest is blocked all the
way out or all the way in.
Inflation gauge needle
does not go back to "0".
Avoid personal injery or death.
The "Spare parts" handbook does not authorise the user to carry out any work on
the machine other than the operations speciically described in the User Manual,
and is only intended to enable the user to provide the technical assistance service
with precise information in order to minimise response times.
A9222 HP TI - A9222 TI - A9824 HP LL - A9824 HP User Manual
46
LIKELY CAUSES
❏ Clamping plate not ad-
justed.
❏ Foreign body jamming
mechanism.
❏ Defective gauge.
❏ Gauge damaged by
impacts
WARNING
REMEDIES
❏ Adjust plate.
❏ Remove foreign bodies.
❏ Change gauge.