Télécharger Imprimer la page

Corghi A 9222 HP TI Manuel D'utilisation page 27

Publicité

Les langues disponibles

Les langues disponibles

7. EQUIPMENT COMPONENTS
(MAIN WORKING ELEMENTS OF THE MACHINE)
Before using the machine, learn exactly how the machine works. This is the best
way to optimize safety and machine performance. Carefully check that all controls
on the machine are working properly.
The machine must be installed properly, operated correctly and serviced regularly
in order to prevent accidents and injuries.
List of parts and description (ig.11):
1
Vertical slide (mount/demount head-holder arm - allows vertical adjustment of the mount/
demount head).
2
Mount/demount head (to mount and demount the tire from the wheel).
Swing arm (for horizontal adjustment of the mount/demount head)
3
4
Tank tower (contains the compressed air required to feed the tubeless inlation system).
5
Swing arm adjustment knob.
6
Valve + pressure gauge (175 psi max. pressure relief valve and inlation pressure read-out
gauge).
7
Sliding clamp table (rotating table for supporting the wheel).
8
Sliding clamp (for locking the wheel to the table).
Table top rotation control pedal with three positions:
9
• position 0: table stopped
• pedal depressed (and held down with foot): clockwise rotation
• pedal lifted (and held up with foot): counterclockwise rotation
10 Sliding clamp closure control pedal with three positions: OPEN / CLOSE and CLAMP APPROACH.
11 Bead breaker pedal (operates bead breaker shoe 14)
12 Inlation pedal (three-position pedal to inlate the tire with the Doyfe inlator chuck 16).
13 Pressure gauge (to read tire inlation pressure).
14 Bead breaker shoe (mobile shoe to break bead from rim).
15 Release valve button (for manual release of excess air pressure from tire).
16 Doyfe inlator chuck (to clip to the tire valve for inlation purposes).
17 Bead lifting tool.
18 Rim support (mobile 2-position support for normal and racing wheels).
19 Filter/lubricator and pressure regulator (air treatment unit that ilters and lubricates the air
and restricts maximum supply pressure to 145 psi [10 bar]).
20 nlation nozzles (air jets from nozzles expand tire walls during inlation of tubeless tires).
21 Vertical slide locking lever (blocks the mount/demount head on the edge of the rim).
22 afety relief valve (maximum pressure 175 psi [12 bar]).
23 Protection kit for alloy wheels.
A9222 HP TI - A9222 TI - A9824 HP LL - A9824 HP User Manual
WARNING
27

Publicité

loading

Ce manuel est également adapté pour:

A 9222 tiA 9824 hp llA 9824 hp