Corghi A 9222 HP TI Manuel D'utilisation page 31

towards the centre).
- Press the pedal
the bead breaker and detach the bead.
- Repeat this operation on the other side of
the wheel.
- After detaching the beads, remove the old
balancing weights.
- Thoroughly lubricate the sides of the tyre
around the entire circumference of the lower
and upper bead (ig.15a).
(ONLY FOR A9824)
- In addition to operating the lever A, ig.16 to
move the rim support into the correct posi-
tion for the width of the rim on which you
are working, the position of the show must
be adjusted appropriately for the size of the
tyre, using the pins B, ig.16a.
A9222 HP TI - A9222 TI - A9824 HP LL - A9824 HP User Manual
(ig.15) to operate
A
16
EXTENDABLE ARM
A Standard position
B Large wheels
position
15
15a
B
B
A
16a
31