Publicité
Les langues disponibles
Les langues disponibles
Install the tyre changer in the chosen work position, complying with the minimum clear-
ances shown in Fig.7.
The surface must have a load-carrying capacity of at least 1000 kg/m
A 9222 HP - A 9222 TI
- Relative humidity 30% - 95% without condensation.
- Temperature 0°C - 50°C.
Each time the machine remains disconnected from the pneumatic line for long periods,
check the direct operation of the controls with the relative arm, following the pressure
restoration procedure. Carry out the irst control operation very slowly.
5. DESCRIPTION
The machine is an electro-pneumatic tyre changer.
The machine is compatible with any type of drop-centre single-piece rims with the di-
mensions and weights indicated in the paragraph TECHNICAL DATA.
The sturdily constructed machine operates with the wheel in a vertical position for bead
breaking and in a horizontal position for mounting and demounting tyres. All functions
are controlled by the operator via pedals and hand-operated valves and levers.
This tyre changer has been designed exclusively for mounting and demounting tyres,
using the tools with which they are equipped as described in this manual.
The machine is equipped with an inlation system independent of all the other functions
A9222 HP TI - A9222 TI - A9824 HP LL - A9824 HP User Manual
24
Work environment conditions
WARNING
A9824 HP - A9824 HP LL
.
2
7
Publicité
