If you are working with aluminium alloy wheels,
external locking is recommended, using with
the supplied protection kit for the sliding
clamps in order to avoid the risk of damaging
the wheel.
The sliding clamp protection kit must also be
used for external locking of 10" wheels.
9.5. DEMOUNTING THE WHEEL
- Position the mount/demount head against
the edge of the rim.
- Immobilize vertical movement of the head
with lever (Fig.20).
- Turn knob (5) in order to adjust the mount/
demount head as illustrated in Figure 20a.
- Only A 9824 HP LL turn the pneumatic control
lever in position down and block the arm in
ix position requested (Fig. 20b).
5
A9222 HP TI - A9222 TI - A9824 HP LL - A9824 HP User Manual
34
NOTICE
20a
20
20b