Publicité
Les langues disponibles
Les langues disponibles
1.2.e. AIR PRESSURES
The machine is equipped with an internal pressure limiting valve to minimize the risk
of over inlating the tyre.
1. Never exceed these pressure limitations:
• Supply line pressure (from compressor) is 220 psi (15 bar).
• Operating pressure (gauge on regulator) is 145 psi (10 bar).
Bead setting pressure (gauge on hose) is the tyre manufacturer's maximum pressure as
stated on the sidewall of the tyre
2. Activate air inlation jets only when sealing the bead.
3. Bleed air pressure system before disconnecting supply line or other pneumatic
components. Air is stored in a reservoir for operation of inlation jets.
4. Only activate the air inlation jets if the rim securing device is locked in place and
the tyre is properly clamped (when possible).
A9222 HP TI - A9222 TI - A9824 HP LL - A9824 HP User Manual
18
• RISK OF EXPLOSION
• Never exceed tyre pressure recommended by tyre manu-
facturer.
• Always match the tyre and rim dimensions.
• Take care to avoid any damage to the tyre.
• During inflation, keep outside the vertical cylinder area oc-
cupied by the wheel.
DANGER
Publicité
