LEGRAND KEOR XPE Serie Manuel De L'utilisateur page 65

6 TOUCHSCREEN – POWER UNIT MANAGEMENT
Pressing a Power Unit icon on the Home Level 2 synoptic, you can access management of the
selected Power Unit parameters. In the following image, management is accessed to the
parameters of Power Unit 1, pressing the relevant icon.
Figure 45 – Front panel: Home Level 2 screen – Access to Home Level 3 screen (System)
A screen will be displayed with the diagram of the synoptic of the power module selected, where
you can access the sections: Measurements, Controls, Alarms, Settings and Info relating to the
Power Unit.
Figure 46 – Front panel: Home Level 3 screen (Power Unit)
In the Home Level 3 screen, the icons: Measurements, Controls, Alarms, Settings and Info
assume a different colour from those of the system. Furthermore, the status bar at the bottom
gives an indication of the power status of the load by the selected Power Unit. It can appear in
different colours:
• Green: load protected;
• Orange: load not protected;
• Red: load not powered.
KEOR XPE UPS user manual
Manuel de l'utilisateur de l'ASI KEOR XPE
Utilizzo dell'UPS KEOR XPE
OMAF9213 REV. C 65