LEGRAND KEOR XPE Serie Manuel De L'utilisateur page 62

 the system composed of 4 Power Units and an IOBM, the slots 6, 7, 8 are free;
 the MASTER is the Power Unit 1;
 the IOBM has index 5.
The page is presented as shown below.
Figure 42 – INFO section – PARALLEL - parallel bus communication (status system rect)
NOTE
In STATUS SYSTEM INV and STATUS SYSTEM RAD the brackets [ ] indicate the position of
the device where the display is present (IOBM). The position of the IOBM varies depending
on the number of PU in the system as summarised in the table below.
• Messages statistics
The statistics section relating to the messages exchanged on the communication buses is
composed of four different parts.
 STAT CAN SSW  Number of messages received and accuracy percentage
of receipt, relating to the static switches status.
 STAT CAN INVERTER Number of messages received and accuracy
percentage of receipt, relating to the system inverters status.
 STAT CAN RECT MSG0  Number of messages received and the accuracy
percentage of receipt, relating to the communication synchronism signal with
the MASTER rectifier.
 STAT CAN RECT Number of messages received and accuracy percentage
of receipt, relating to the system rectifiers status.
62 OMAF9213 REV. C
KEOR XPE UPS user manual
Manuel de l'utilisateur de l'ASI KEOR XPE
Utilizzo dell'UPS KEOR XPE
NUMBER OF PU
2
3
4
5
6
7
IOBM POSITION
3
4
5
6
7
8