LEGRAND KEOR XPE Serie Manuel De L'utilisateur page 25

Set the right battery capacity
The UPS front panel allows the setting of the battery parameters, including the rated
capacity. Considering the importance that such value assumes for the correct
execution of the charge control algorithm, it is highly recommended to verify the
correctness of the programmed value.
3.4.3 Bypass operation
The load can be switched to bypass either automatically or manually. The manual changeover
is due to the BYPASS SWITCH which forces the load to bypass. In case of failure of the bypass
line, the load is switched back to inverter without interruption.
Picture 4 – Load supplied by bypass centralized battery
KEOR XPE UPS user manual
Manuel de l'utilisateur de l'ASI KEOR XPE
Utilizzo dell'UPS KEOR XPE
OMAF9213 REV. C 25