Publicité
Les langues disponibles
Les langues disponibles
Management is possible of the system parameters by entering the various sections of the
control panel directly from the Home page or the Home Level 2 page.
5.1
MEASUREMENTS DISPLAY - SYSTEM
Press the Measurements icon to access the All Measurements screen.
Figure 11 – Measurements -- All Measurements (System)
A list follows of all the available measurements.
Section
INPUT
BYPASS
OUTPUT
BATTERY
AC / DC
GENERAL
(1)
The voltage measurements are always referenced between phase and neutral
(2)
The temperatures are only displayed if the relevant probe is installed
38
OMAF9213 REV. C
KEOR XPE UPS user manual
Manuel de l'utilisateur de l'ASI KEOR XPE
Utilizzo dell'UPS KEOR XPE
Data displayed
Voltage
(1)
Voltage
(1)
Frequency
Voltage
(1)
Current
Load percentage
Frequency
Apparent power
Active power
Voltage
Negative semi-plate current
Positive semi-plate current
Nominal capacity
Residual autonomy
Residual autonomy
Temperature
(2)
Rectifier output voltage
Ambient temperature
Accuracy
(2)
1 V
1 V
0.1 Hz
1 V
1 A
1 %
0.1 Hz
1 kVA
1 kW
1 V
1 A
1 A
1 Ah
1 min
1 %
0.1° C
1 V
0.1° C
Publicité
