Ecolab EcoPro Manuel D'utilisation page 124

Safety
2.8 Installation, maintenance and repair work
NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools. Use the correct tools.
DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
All installation, maintenance and repair work must only be performed by
authorised and trained specialist personnel in accordance with the applicable
local regulations. Safety regulations and prescribed protective clothing when
handling chemicals should be followed. Attention must be paid to the
information included on the product data sheet for the metering medium used.
Prior to all work the feeding of the metering medium should be disconnected
and the system cleaned.
NOTICE!
Only original equipment spare parts may be used for maintenance and
repairs.
CAUTION!
For maintenance work, the EcoPro must be placed to the 'Maintenance
mode' which causes the motor and the diaphragm to be reset, simplifying
the maintenance work!
It is essential that you observe procedure in
on page 56 !
After the dosing pump is placed into the 'Maintenance mode' the mains plug
must be disconnected to prevent accidents.
MAN046879 Rev. 12-01.2024
Ä Chapter 10 'Maintenance'
22