Ecolab EcoPro Manuel D'utilisation page 112

General
1.6 Packaging
The packages are packaged according to the expected transport conditions. The
packaging is designed to protect the individual components up to assembly against
shipping damage, corrosion and other damage.
Therefore, do not destroy the packaging and only remove it just before assembly.
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal!
Only environment-friendly materials were used for the packaging. Packaging
materials are valuable raw materials and can, in many cases, be used again,
be processed or recycled.
Incorrect disposal of packaging materials can be a threat to the
environment.
– Observe the locally applicable disposal regulations!
– Environmentally-friendly disposal of packaging materials.
– If necessary, hire a specialist to carry out disposal.
Symbols on the packaging
Symbol Description
Keep this product dry
Protect against cold
Electrostatic sensitive
MAN046879 Rev. 12-01.2024
Description
The package must be principally transported, handled and stored in such a way that the arrow is
Top
always indicated upwards. Rolling, folding, severe tilting or tumbling or other such handling must be
avoided. ISO 7000, No 0623
The symbol has to be fixed in case of easily breakable goods.
Fragile
Goods marked as such have to be handled with care and must in no way be toppled or fastened.
ISO 7000, No 0621
Goods marked as such have to be protected from high humidity, and thus must be stored covered.
If it is not possible to store particularly heavy or bulky packages in halls or shed, they have to be
carefully covered with tarpaulin. ISO 7000, No 0626
Goods marked as such must be protected against excessive cold. These packages should not be
stored outdoors.
Maximum number of identical individual packages that can be stacked, where n stands for the
Stack limiting
number of permissible individual packages. ISO 7000, No 2403
Contact with packages marked as such must be avoided at low levels of relative humidity, especially
if insulating footwear is being worn or the ground/floor is nonconductive. Low levels of relative
device
humidity must in particular be expected on hot, dry summer days and very cold winter days.
10