Hoshizaki SF 950+ Manuel D'utilisation, D'entretien Et D'installation page 27

Baker SF 950+ / 550
VIII. SUITABLE INSTALLATION SITE
The cabinet must be installed in a dry, well ventilated room away from direct sunlight at a sufficient distance
from radiators and other sources of heat. Please always take into account the waste heat of all cabinets
installed in one room!
The ambient temperature must lie between a minimum of +16 °C and a maximum of + 40 °C. A gap of at
least 0.5 cm must be kept between the top edge of the machine compartment and the ceiling. The air exchange
in this area must not be obstructed from the front or the side by screens etc. hanging from the ceiling.
For electrical safety reasons, the cabinet must not be operated outside. The refrigeration technology of the
cabinet does not function outside or in unheated rooms (particularly in colder seasons) and can be damaged by
low temperatures
Distance from walls and ceiling:
A gap of at least 500 mm must be kept between the top edge of the machine
compartment and the ceiling, and of at least 100 mm from walls, furniture and other
cabinets.
EN
27