Hoshizaki SF 950+ Manuel D'utilisation, D'entretien Et D'installation page 10

Baker SF 950+ / 550
CONNECTION, DISPLAY AND LOADING OF THE SOFTWARE
Switch the unit on with the on/off button:
Once the unit has been connected up, all segments in
the display will light up in white for approx. 3 seconds
(display test).
Subsequently, the selected program will be shown on
the secondary display - "P07" in this case. The program
"P07" controls 2 compressors. Hence both compressor
symbols will light up in blue.
Afterwards, all used segments will be displayed in their
respective colours. The secondary display will also show
the software version - "4.0" in this case.
Finally, the secondary display will show yet another version
number for the software. When this display ends, the unit
is ready for operation, and the temperature is shown in the
primary display.
EN
10