Hettich ROTINA 380 Mode D'emploi page 97

6.6.2 Lid with screw cap and hole
1
2
Fig. 23: Biosafety system
1 Rotary handle
2 Rotor
3 Lid
4 Key
Closing
Opening
6.6.3 Lid with screw cap
Fig. 24: Biosafety system
1 Lid
2 Bucket
Closing
Opening
6.7 Centrifugation
6.7.1 Centrifugation in continuous operation
AB1701en
3
4
1. Place the lid (
2. Insert the supplied key (
3. Turn the lid (
1. Insert the supplied key (
2. Turn the lid (
3. Remove the lid (
1
2
1. Place the lid (
2. Turn the lid (
1. Turn the lid (
2. Remove the lid (
Personnel:
■
Trained user
1. Set minutes, seconds and hours on
running program.
[START] button.
2. Press the
�� The centrifugation run is started.
[START] button flashes until the rotor is read in.
The
[START] button lights up during the centrifugation run.
The
The timing starts at
The rotor speed or the resulting RCF value, the temperature in
the centrifuging chamber (only for centrifuges with cooling) and the
elapsed time are displayed during the centrifugation run.
Rev.: 16 / 11.2023
3 ) centrally on the rotor ( 2 ).
4 ) into the hole in the rotary handle ( 1 ).
3 ) at the key ( 4 ) clockwise until it is tightly closed.
4 ) into the hole in the rotary handle ( 1 ).
3 ) at the key ( 4 ) anticlockwise until it is open.
3 ) from the rotor ( 2 ).
1 ) centrally on the bucket ( 2 ).
1 ) clockwise until it is tightly closed.
1 ) anticlockwise until it is open.
1 ) from the bucket ( 2 ).
'00:00' .
Operation
'0' or retrieve a continuously
31 / 63