Hettich ROTINA 380 Mode D'emploi page 87

AB1701en
1
4
4
Fig. 20: Transport lock
1 Screws
2 Motor cover
3 Bellows (only for centrifuges with refrigeration)
4 Transport lock
5 Transport lock screws
6 Spacer sleeve
1. Open the lid.
2. Unscrew and remove the motor cover (
3. For ROTINA 380 R:
Remove the bellows (
4. Insert 3 transport locks (
on using the 3 transport lock screws (
5. For ROTINA 380 R:
Turn over the bellows (
6. Turn over the motor cover (
7. Screw in 4 screws (
Rev.: 16 / 11.2023
Transport and storage
1
4
2 ).
3 ).
4 ) and 3 spacer sleeves ( 6 ) and screw them
5 ).
3 ) and insert it.
2 ) and insert it.
1 ).
2
3
21 / 63