Hettich ROTINA 380 Mode D'emploi page 100

Software operation
Brake level and ramp-down
time
Brake cut-off speed
7.1.2 Runtime TIME
Changing the runtime
34 / 63
4. If required: Press the
to set the next parameter.
[START] button.
5. Press the
or
[Ramp-up and ramp-down parameters] button repeatedly
Press the
until the centrifugation data is displayed.
'Ramp-down time' function is enabled.
The
[Ramp-up and ramp-down parameters] button repeatedly
1. Press the
'Brake level' parameter or the 'Ramp-down time' parameter
until the
is displayed.
2. Press the [TIME] button to toggle between the brake level and the
ramp-down time.
[Rotary knob] to set the desired level or time.
3. Use the
4. If required: Press the
to set the next parameter.
[START] button.
5. Press the
or
[Ramp-up and ramp-down parameters] button repeatedly
Press the
until the centrifugation data is displayed.
[Ramp-up and ramp-down parameters] button repeatedly
1. Press the
'N Brake' parameter is displayed.
until the
[Rotary knob] to set the desired value.
2. Use the
[Ramp-up and ramp-down parameters] button
3. The
or
[START] button.
Press the
�� Settings are shown in the indicator.
For continuous operation, the minutes, seconds and hours
must be set to zero.
Continuous operation is indicated in the indicator by means
of the '¥' symbol.
[TIME] button.
1. Press the
't/hms' is displayed.
��
The minutes are displayed in brackets á ñ.
2. Use the [Rotary knob] to set the desired value.
[TIME] button.
3. Press the
�� The seconds are displayed in brackets á ñ.
[Rotary knob] to set the desired value.
4. Use the
[TIME] button.
5. Press the
�� The hours are displayed in brackets á ñ.
[Rotary knob] to set the desired value.
6. Use the
Rev.: 16 / 11.2023
[Ramp-up and ramp-down parameters] button
[Ramp-up and ramp-down parameters] button
AB1701en