Yamaha YZ125/LC Manuel D'atelier Du Proprietaire page 282

CLUTCH AND PRIMARY DRIVEN GEAR
5. Install:
9 Friction plate 1 1
9 Clutch plate 2
9 Friction plate 2 3
NOTE:
9 Install the clutch plates and friction plates alter-
nately on the clutch boss, starting with a friction
plate and ending with a friction plate.
9 Use the friction plates 1 for the first and final
while paying attention to the difference in sur-
face pattern.
9 Apply the transmission oil on the friction plates
and clutch plates.
6. Install:
9 Push rod 1
9 Plain washer 2
9 Bearing 3
To pressure plate 4.
NOTE:
Apply the lithium soap base grease on the bear-
ing, plain washer and push rod.
7. Install:
9 Pressure plate 1
8. Install:
9 Clutch spring 1
9 Screw (clutch spring) 2
NOTE:
Tighten the screws in stage, using a crisscross
pattern.
4-35
ENG
10 Nm (1.0 m•kg, 7.2 ft•lb)