Yamaha YZ125/LC Manuel D'atelier Du Proprietaire page 472

SWINGARM
3. Install:
9 Collar 1
To connecting rod 2.
NOTE:
Apply the molybdenum disulfide grease on the
collar and oil seal lips.
4. Install:
9 Connecting rod 1
9 Bolt (connecting rod) 2
9 Plain washer 3
9 Nut (connecting rod) 4
To relay arm 5.
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5. Install:
9 Relay arm 1
9 Bolt (relay arm) 2
9 Plain washer 3
9 Nut (relay arm) 4
To swingarm.
NOTE:
9 Apply the molybdenum disulfide grease on the
bolt.
9 Do not tighten the nut yet.
6. Install:
9 Swingarm 1
9 Pivot shaft 2
NOTE:
9 Apply the molybdenum disulfide grease on the
pivot shaft.
9 Insert the pivot shaft from right side.
5-56
CHAS
80 Nm (8.0 m•kg, 58 ft•lb)
85 Nm (8.5 m•kg, 61 ft•lb)