ENGINE REMOVAL
EC4M5000
ASSEMBLY AND INSTALLATION
EC4M5171
Engine installation
1. Install:
9 Engine 1
Install the engine from right side.
9 Pivot shaft 2
9 Engine mounting bolt (lower) 3
9 Engine mounting bolt (front) 4
9 Engine bracket 5
9 Bolt (engine bracket) 6
9 CDI unit bracket 7
9 Engine mounting bolt (upper) 8
NOTE:
Apply the molybdenum disulfide grease on the
pivot shaft.
EC4M5211
Brake pedal
1. Install:
9 Spring 1
9 Brake pedal 2
9 O-ring 3
9 Bolt (brake pedal) 4
9 Clip 5
NOTE:
9 Apply the lithium soap base grease on the bolt,
O-rings and brake pedal bracket.
9 Install the clip with its stopper portion a facing
inward.
EC4M5311
Drive sprocket
1. Install:
9 Drive sprocket 1
9 Drive chain 2
NOTE:
Install the drive sprocket together with the drive
chain.
4-60
ENG
85 Nm (8.5 m•kg, 61 ft•lb)
64 Nm (6.4 m•kg, 46 ft•lb)
64 Nm (6.4 m•kg, 46 ft•lb)
34 Nm (3.4 m•kg, 24 ft•lb)
34 Nm (3.4 m•kg, 24 ft•lb)
26 Nm (2.6 m•kg, 19 ft•lb)