Yamaha YZ125/LC Manuel D'atelier Du Proprietaire page 434

FRONT FORK
26. Install:
9 Cap bolt 1
To outer tube.
NOTE:
Temporarily tighten the cap bolt.
27. Install:
9 Protector guide 1
EC5552A1
Installation
1. Install:
9 Front fork 1
NOTE:
9 Temporarily tighten the pinch bolts (under
bracket).
9 Do not tighten the pinch bolts (handle crown)
yet.
2. Tighten:
9 Cap bolt 1
3. Adjust:
9 Front fork top end a
Front fork top end (standard) a a :
5 mm (0.20 in)
4. Tighten:
9 Pinch bolt (handle crown) 1
9 Pinch bolt (under bracket) 2
cC
Tighten the under bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
5-37
CHAS
30 Nm (3.0 m•kg, 22 ft•lb)
23 Nm (2.3 m•kg, 17 ft•lb)
20 Nm (2.0 m•kg, 14 ft•lb)