Yamaha YZ125/LC Manuel D'atelier Du Proprietaire page 456

STEERING
EC564101
Bearing and ball race
1. Wash the bearings and ball races with a sol-
vent.
2. Inspect:
9 Bearing 1
9 Ball race
Pitting/Damage ¡ Replace bearings and
ball races as a set.
Install the bearing in the ball races. Spin the
bearings by hand. If the bearings hang up or
are not smooth in their operation in the ball
races, replace bearings and ball races as a
set.
EC565000
ASSEMBLY AND INSTALLATION
EC5651A0
Under bracket
1. Install:
9 Bearing (lower) 1
NOTE:
Apply the lithium soap base grease on the dust
seal lip and bearing inner circumference.
2. Install:
9 Ball race
9 Bearing (upper) 1
9 Ball race cover 2
NOTE:
Apply the lithium soap base grease on the bear-
ing and ball race cover lip.
3. Install:
9 Under bracket 1
NOTE:
Apply the lithium soap base grease on the bear-
ing, the portion a and thread of the steering
shaft.
5-48
CHAS