Steinberg Nuendo DD8 Mode D'emploi page 36

10.9 – 2-channel AES to 8-channel AES Splitter (96 kHz)
SOURCE: AES
Note: If only one AES input is being fed with a valid signal, the Nuendo
DD 8 automatically switches to a distribution mode. The input signal
will be copied to all stereo output channels (splitter 1 to 4), i. e. it will
appear at all four AES outputs. If AES is selected as input source for the
left part, this also holds true for the ADAT/TDIF outputs (see 10.3).
10.10 – 4-channel AES Double Wire to AES Single Wire Converter (96 kHz)
SOURCE: AES
Note: If the input signal is present in Double Wire format, DS has to be
activated manually in order to have the AES outputs transmit 4 chan-
nels of Double Speed / Single Wire data.
10.11 – 4-channel AES Single Wire to AES Double Wire Converter (96 kHz)
SOURCE: AES
Note: When DS is not active and the input signal is in Single Wire Dou-
ble Speed format, the data will be converted to Double Wire Single
Speed,. Because only 8 physical output channels are available, there
will only be 4 audio channels effectively. The inputs 5 - 8 cannot be
transmitted via AES.
10.12 – 8-channel ADAT/TDIF to ADAT || TDIF Sample Rate Converter
(96 kHz)
The Nuendo DD 8's sample rate conversion is a fixed component of the
AES inputs. However, because the device contains two independant
format converters, also 8 channels ADAT or TDIF can be changed in
sample rate and clock-decoupled!
To achieve this, connect the four AES outputs with the four AES inputs
(loop-back cabling), i. e. 1 with 1, 2 with 2, 3 with 3 and 4 with 4.
Right part
SOURCE: ADAT or TDIF
NUENDO DD 8
English – 36