Steinberg Nuendo DD8 Mode D'emploi page 35

10.4 – 8-channel ADAT/TDIF to 2 x ADAT || 2 x TDIF Splitter (48 k mHz)
SOURCE: ADAT or TDIF
Note: For sample rates below 56 kHz the MAIN and AUX outputs will
carry the same data. Thus two outputs each for ADAT and TDIF can be
used (splitter).
10.5 – 16-channel ADAT/TDIF to ADAT || TDIF Converter (48 kHz)
SOURCE: ADAT or TDIF
Note: If DS is activated manually at sample rates below 56 kHz, the
MAIN and AUX outputs will not carry the same data any longer. Instead
the data from the MAIN and AUX inputs will be passed 1:1 to the MAIN/
AUX outputs. It is then possible to transmit and convert 16 channels at
the same time.
10.6 – 8-channel ADAT/TDIF to ADAT || TDIF Converter (96 kHz)
Note: Identical to 10.5
Signals in Sample Split (S/MUX) or Double Line format require 16 chan-
nels for the transmission of 8 channels Double Speed. Therefore the
data has to be passed on 1:1.
Right Part
10.7 – 8-channel ADAT/TDIF to AES Converter (96 kHz)
SOURCE: ADAT or TDIF
Note: If the input data is encoded in Sample Split (S/MUX) or Double Line
format, the DS function has to be activated manually in order to have the
AES outputs transmit 8 channels in Double Speed / Single Wire.
10.8 – 8-channel AES to AES Sample Rate Converter (96 kHz)
SOURCE: AES
Note: After activating the sample rate converter (SRC) and using the in-
ternal clock (INT), the desired output sample rate can be chosen with
the clock button.
NUENDO DD 8
English – 35