Publicité
Les langues disponibles
Les langues disponibles
Setup menus
OPERATION menu
Item
Superimposed
No.
display
100
SEARCH ENA
101
SHTL MAX
102
FF. REW MAX
103
AUDIO MUTE
106
EE MODE SEL
107
PLAY DELAY
108
CAP. LOCK
109
AUTO REW
The underlining indicates the factory setting.
Setting
Superimposed
No.
display
This selects the direct search operation.
0000
DIAL
0: Direct search mode
0001
KEY
1: Non-direct search mode (search dial operations are
acknowledged only in the STILL mode).
This selects the maximum speed in the shuttle mode.
0000
x8.4
0: 84 times normal speed
0001
x16
1: 16 times normal speed
0002
x32
2: 32 times normal speed
This selects the maximum speed of fast forwarding and rewinding.
0000
x16
0: 16 times normal speed
0001
x32
1: 32 times normal speed
0002
x50
2: 50 times normal speed
This selects the status to be established until the audio signals are
output when the unit has transferred from the STOP mode or
search mode to the PLAY mode.
0000
OFF
0: The time taken until the audio signals are output is reduced.
0001
ON
1: The audio signals are output after the mode transfer has been
completed.
This selects the output signals in the E-E mode.
0000
NORMAL
0: The signals, which have been delayed by the time taken to
process them internally, are output.
0001
THRU
1: The signals are not internally processed and output in their
original form without a delay.
<Notes>
O "0: NORMAL" is forcibly selected when assemble or insert
editing mode has been selected even with internal connections
(INT mode) or even in the EXT/SEPARATE mode.
O The "THRU" mode is always set for VTR1.
0000
0 (VTR1)
This selects the PLAY mode startup time in frame increments.
<Note>
0005
5 (VTR2)
When VTR1 and VTR2 are connected to external components
and controlled from them, set the same PLAY DELAY value for
0015
15
the whole system.
This selects the CAPSTAN LOCK mode when the SYNCHRO
switch has been set to CF.
0000
4F
0: 4F mode
0001
8F
1: 8F mode
<Note>
In the 525i mode, this setup menu item does not appear.
This selects the processing to be conducted when the tape end
0000
OFF
has been detected.
0001
ON
0: The tape is stopped when it comes to the end.
1: The tape is rewound to its start.
33
Description of setting
V
V
T
T
R
R
1
2
[
[
[
[
[
[
[
[
[
[
[
[
[
Publicité
