Panasonic DVCPRO50 AJ-LT95P Manuel D'instructions page 78

Clearing edit data in the EDL memory
Clearing all the edit data
1
Press the EVENT button.
2
Press the 9 button three times to show "999" on
the event number display lamps.
3
Press the ENTER button while holding down the
SHIFT button.
All the edit data inside the EDL memory area is
now cleared.
<Note>
Similarly, it is possible to clear all the edit data
inside the EDL memory area by pressing the
[SHIFT] + [ALL STOP] + [C] buttons at the same
time.
78