Publicité
Les langues disponibles
Les langues disponibles
Setup menus
TIME CODE menu
Item
Superimposed
No.
display
506
BINARY GP
507
PHASE CORR
508
TCG CF FLAG
509
DF MODE
511
VITC OUT
570
REGEN SEL
The underlining indicates the factory setting.
Setting
Superimposed
No.
display
This selects the usage status of the user's bit in the time code
generated by the TCG.
0000
000
0: Not specified (character set is not specified).
0001
001
1: ISO characters (8-bit character set complying with ISO646,
ISO2022)
0002
010
2: Unassigned 1 (not defined)
0003
011
3: Unassigned 2 (not defined)
0004
100
4: Unassigned 3 (not defined)
0005
101
5: Page/line
0006
110
6: Unassigned 4 (not defined)
0007
111
7: Unassigned 5 (not defined)
This selects whether the phase correction for the LTC generated
by the TCG is to be controlled.
0000
OFF
0: Phase correction is not controlled.
0001
ON
1: Phase correction is controlled.
This selects the color framing flag into the TCG.
0000
OFF
0: The color framing flag is set to OFF.
0001
ON
1: The color framing flag is set to ON.
This selects the CTL and TCG drop frame mode.
0000
DF
0: For operation in the drop frame mode.
0001
NDF
1: For operation in the non-drop frame mode.
<Note>
In the 625i mode, this setup menu item does not appear.
This selects the method used to output the VITC which is
superimposed onto the output video signal.
0000
SBC
0: During recording:
The input time code set by setup menu item No.570 (REGEN
SEL) or the TC generator switch is output as the VITC.
During playback:
The time code recorded in the SBC area is output as VITC.
0001
VAUX
1: During recording:
The time code detected from among the input video signals is
output as VITC.
During playback:
The time code recorded in the VAUX area is output as VITC.
<Note>
The time code detected from among the input video signals is
automatically output as VAUX when pictures are recorded.
This selects whether the internal TCG or external time code is to
be used when the REGEN/PRESET switch has been set to the
REGEN position.
0000
I-REG
0: The internal TC is used in the regeneration mode.
0001
E-VITC
1: The input video signal VITC is used in the regeneration mode.
0002
E-LTC
2: The LTC in the TC input is used in the regeneration mode.
0003
VTR1TC
3: The sub-code TC is used in the regeneration mode when the
OPERATION MODE switch is set to INT.
<Note>
The VTR1 TC can be set only on the VTR2 side.
42
Description of setting
V
V
T
T
R
R
1
2
[
[
[
[
[
[
[
[
[
[
[
[
Publicité
