Publicité
Les langues disponibles
Les langues disponibles
Setup menus
SYSTEM menu
Item
Superimposed
No.
display
11
SYS SC
13
VIDEO PHASE
16
AV PHASE
17
SYS H RANGE
18
SYS H OFFSET
30
MENU LOCK
70
P.ON LOAD
The underlining indicates the factory setting.
Setting
Superimposed
No.
display
0000
–127
This is for adjusting the system phase. The total variable range is
at least ±180 degrees.
0127
0
–: The phase is advanced.
+: The phase is delayed.
0255
128
0000
–32
This is for adjusting the video signal phase (in 148 ns steps).
–: The phase is advanced.
0032
0
+: The phase is delayed.
0064
32
0000
–90
This is for adjusting the phase of the audio output with respect to
the video output signals (in 20.8 µs steps).
0090
0
–: The audio output phase is advanced ahead of the video output.
+: The audio output phase is delayed from the video output.
0180
90
This selects the SYSTEM H variable range.
0000
FULL
0: ±8 µs
0001
FINE
1: –2.0 µs to +2.7 µs
This selects the SYSTEM H center position.
0000
–3
0: –13.4 µs
0001
–2
1: –8.96 µs
0002
–1
2: –4.52 µs
0003
0
3: 0 µs
0004
1
4: +4.52 µs
0005
2
5: +8.96 µs
0006
3
6: +13.4 µs
This selects the setup menu lock mode.
0000
OFF
0: The lock is released (enabling changes to be made).
0001
ON
1: The lock is engaged (prohibiting changes).
This is for establishing the setting that changes the setup menu
settings to the user's initial settings when the power is turned on.
0000
OFF
0: The setup menu settings remain unchanged.
0001
ON
1: The setup menu settings are changed.
31
Description of setting
V
V
T
T
R
R
1
2
[
[
[
[
[
[
[
[
[
[
[
[
Publicité
