Sabo 72-12 HF Livret D'entretien page 80

38
EN
PROBLEM SITUATION
10. The blade Key in «ON»,
does not engage engine running
or does not stop
promptly when it
is disengaged
11. Uncertain Key in «ON»,
or ineffective engine running
braking
12. Erratic for- Key in «ON»,
ward movement, engine running
poor drive when
going uphill or
if the machine
has a tendency
to rear up
13. Unusual Key in «ON»,
vibrations while engine running
working
If problems continue after having carried out these operations, contact a Licensed
Service Centre.
WARNING!
necessary equipment and the technical knowledge. The guarantee is automati-
cally revoked and the manufacturer declines all responsibility for any repairs
which are badly done.
All manuals and user guides at all-guides.com
LIKELY CAUSE
– forward speed too high
compared to height of grass
– collector channel is obstructed
– cutting deck full of grass
– problems with the engagement
system
– the brake is not adjusted
correctly
– problems with the belt
or the engagement device
– the blade is imbalanced
– blade loose
– fixing screws loose
– cutting deck is obstructed
Do not take on complicated repair work if you don't have the
TROUBLESHOOTING
SOLUTIONS
– reduce forward speed
and/or raise the cutting
deck
– wait for grass to dry
– remove the grass-catcher
and empty the collector
channel
– clean the cutting deck
– contact a Licensed Service
Centre
– contact a Licensed Service
Centre
– contact a Licensed Service
Centre
– contact a Licensed Service
Centre
– contact a Licensed Service
Centre
– check and tighten all the
fixing screws of engine and
the machine
– remove the grass-catcher,
empty the collector channel
and clean the inside of the
cutting deck