Publicité
Les langues disponibles
Les langues disponibles
20
EN
IMPORTANT
smoothly. Using it when the engine is already warm can foul the spark plugs and
cause the engine to run erratically.
NOTE
running the battery flat and flooding the engine. Turn the key to «OFF», wait for a few
seconds and then repeat the operation. If the malfunction persists, refer to the en-
gine manual and chapter «8» in this manual.
IMPORTANT
from starting if safety requirements have not been met (
In these cases, once the situation has been corrected, the key must first be turned
back to «OFF» before the engine can be restarted.
5.2.2 Moving without mowing
WARNING!
It has to be used (as indicated by the highway code) in private areas closed to
traffic.
NOTE
the cutting deck put at its highest position (position «7»).
Mechanical transmission
Put the accelerator control between the «SLOW» and «FAST» positions, and the
gear change lever in the 1st speed position.
Keep the pedal pressed down and disengage the parking brake. Slowly release the
pedal which will turn from «brake» to «clutch», thus operating the rear wheels.
The pedal has to be released gradually as a sudden engagement may cause tipping
up and loss of control of the vehicle.
Gradually reach the desired operating speed using the accelerator and gear lever.
To change the gear speed the clutch must be used pushing the pedal down half
way.
Hydrostatic transmission
Put the accelerator control between the «SLOW» and «FAST» positions. Press the
brake pedal to disengage the parking brake and release the pedal.
All manuals and user guides at all-guides.com
The choke must be closed as soon as the engine is running
If there are engine starting problems, do not insist as you can risk
Always bear in mind that the safety devices prevent the engine
The machine has not been approved for use on public roads.
When moving the machine, the blade must be disengaged and
HOW TO USE THE MACHINE
5.3.7).
Publicité
