Volume Measurement; Indirect Measurement - TOOLCRAFT LDM 50 P Mode D'emploi

16. Volume measurement

1. Push the button FUNC (I) three times. The display shows a cube to
indicate volume measurement mode.
2. Activate the target laser (B) by pushing the button ON (C).
3. Push the button ON to measure the first side length of the space.
The measurement is shown in the upper line.
4. Activate the target laser by pushing the button ON.
5. Push the button ON to measure the second side length of the space.
The measurement is shown in the middle line.
6. Activate the target laser by pushing the button ON.
7. Push the button ON to measure the height of the space. The
measurement is shown in the middle line.
8. The device multiplies all three readings automatically. The volume of
the space is shown in the bottom line.

17. Indirect measurement

By applying the Pythagorean theorem (a
can be determined indirectly.
With two reference points
1. Push the button FUNC (I) four times. A triangle is shown at the top
of the display to indicate indirect measurement with two reference
points.
46
+b =c ), the height of an object
2 2 2