TOOLCRAFT LDM 50 P Mode D'emploi page 35

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Batteries
Correct polarity must be observed while inserting the batteries.
Batteries should be removed from the device if it is not used for
a long period of time to avoid damage through leaking. Leaking or
damaged batteries might cause acid burns when in contact with
skin, therefore use suitable protective gloves to handle corrupted
batteries.
Batteries must be kept out of reach of children. Do not leave batteries
lying around, as there is risk, that children or pets swallow them.
All batteries should be replaced at the same time. Mixing old and
new batteries in the device can lead to battery leakage and device
damage.
Batteries must not be dismantled, short-circuited or thrown into
fire. Never recharge non-rechargeable batteries. There is a risk of
explosion!
Miscellaneous
Consult an expert when in doubt about operation, safety or
connection of the device.
Maintenance, modifications and repairs are to be performed
exclusively by an expert or at a qualified shop.
If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
35

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1007588

Table des Matières