TOOLCRAFT LDM 50 P Mode D'emploi page 33

• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can
no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions
or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from
a low height can damage the product.
Laser
• When operating the laser equipment, always make sure that the
laser beam is directed so that no one is in the projection area and
that unintentionally reflected beams (e.g. from reflective objects)
cannot be directed into areas where people are present.
• Laser radiation can be dangerous, if the laser beam or its reflection
enters unprotected eyes. Therefore, before using the laser
equipment, familiarize yourself with the statutory regulations and
instructions for operating such a laser device.
• Never look into the laser beam and never point it at people or
animals. Laser radiation can seriously damage your eyes.
• If laser radiation enters your eyes, close your eyes immediately and
move your head away from the beam.
• If your eyes have been irritated by laser radiation, do not continue
to carry out tasks with safety implications, such as working with
machines, working from great heights or close to high voltage.
Also, do not operate any vehicles until the irritation has completely
subsided.
• Do not point the laser beam at mirrors or other reflective surfaces.
The uncontrolled, reflected beam may strike people or animals.
33