Controls And Indicators - Fronius Primo 3.0-1 Instructions De Service

Controls and indicators

Controls and indi-
cators
Item
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1)
(2)
(3)
(4)
(5)
Description
Display
showing values, settings and menus
Monitoring and status LEDs
General status LED (red)
on steady,
- if a status message is being displayed on the monitor
- if the process of feeding energy into the grid is interrupted
- while error handling (the inverter waits for an acknowledgement or for an
error to be rectified)
Startup LED (orange)
on steady if
- the inverter is in its automatic startup or self-test phase (as soon after sun-
rise as the solar modules are delivering sufficient power)
- the inverter has been switched to standby mode in the setup menu (= feed-
ing energy into the grid switched off manually)
- the inverter software is being updated
Operating status LED (green)
on steady,
- if the PV system is working correctly after the inverter's automatic startup
phase
- all the time while energy is being fed into the grid
Function keys - allocated different functions depending on the selection:
'Left/up' key
for navigating to the left and up
'Down/right' key
for navigating down and to the right
'Menu/Esc' key
for switching to the menu level
for quitting the Setup menu
'Enter' key
for confirming a selection
(6) (7) (8)
17