Controls And Indicators; Controls And Displays - Fronius Primo 3.0-1 Instructions De Service

Controls and indicators

Controls and dis-
plays
Item
(1)
Monitoring and status LEDs
(2)
(3)
(4)
Function keys - allocated different functions depending on the selection:
(5)
(6)
(7)
(8)
20
Description
Display
For displaying values, settings and menus
General status LED (red) lights up
- if a status message is being displayed on the monitor
- If the process of feeding energy into the grid is interrupted
- During error handling (the inverter waits for an acknowledge-
ment or for an error to be rectified)
Startup LED (orange) lights up
- If the inverter is in its automatic startup or self-test phase (as
soon after sunrise as the solar modules are delivering sufficient
power)
-
If the inverter has been switched to Standby mode in the Setup
menu (= feeding energy into the grid switched off manually)
- If the inverter software is being updated
Operating status LED (green) lights up
- If the PV system is working correctly after the inverter's auto-
matic startup phase
- all the time while energy is being fed into the grid
"Left/up" key
For navigating to the left and up
"Down/right" key
For navigating down and to the right
"Menu/Esc" key
For switching to the menu level
For quitting the Setup menu
"Enter" key
For confirming a selection