MINN KOTA RIPTIDE POWERDRIVE Instructions D'installation page 7

2
b. Place the mount on an elevated, level surface such
as a workbench or the tailgate of a pickup. The
motor, as removed from the box, should be in the
stowed position.
c. Remove the four sideplate screws using a #3 or #2
Phillips screwdriver. Two of these screws will be
located on each side of the mount.
NOTICE: This motor weighs approximately 30 lbs.
We recommend having a second person help with
the installation.
3
d. Remove the Right Sideplate.
e. Swing the Left Sideplate out and away from the
Base Extrusion.
3d
©2023 Johnson Outdoors Marine Electronics, Inc.
Right Sideplate Right Sideplate
INSTALLING THE RIPTIDE POWERDRIVE
2b
Deployed Deployed
2c
3e
Base Extrusion Base Extrusion
Stowed Stowed
Sideplate Screw Sideplate Screw
Left Left
Sideplate Sideplate
minnkotamotors.com | 7