MINN KOTA RIPTIDE POWERDRIVE Instructions D'installation page 17

5
ITEM(S) NEEDED
i. If installing directly to a Helix Adapter Cable
(Item #15), align the Receptacle on the Ethernet
Cable with the Eight Pin Connector on the Helix
Adapter Cable provided. Notice the keyed
connectors. Tighten the Collar from the Ethernet
Cable to secure the connection.
NOTICE: Minn Kota provides one Helix Adapter
Cable (AS EC QDE - Ethernet Adapter Cable -
720074-1) with every trolling motor equipped with
Advanced GPS Navigation.
j. The Helix Adapter Cable directly connects the
Ethernet Cable to a Helix fish finder. Locate the
Helix Adapter Cable Keyed Connector on the
back of the fish finder. Plug the Helix Adapter Cable
into the back of the Helix fish finder to complete
the connection.
k. If your trolling motor has more than one external
connector for an output device, complete the
connection for that specific output and then follow
the instructions for "Securing Accessory Cables"
to complete the output cable installation.
NOTICE: If unsure of what features your
trolling motor may be installed with that require
connection to an output device, please review
the "Identifying Trolling Motor Features And
Their Associated Cables" section of this manual.
©2023 Johnson Outdoors Marine Electronics, Inc.
#15 x 1
5i
Ethernet Ethernet
Cable Cable
5j
ADVANCED GPS NAVIGATION
Receptacle Receptacle
Ethernet Ethernet
Cable Cable
Helix Adapter Cable Helix Adapter Cable
Eight Pin Eight Pin
Connector Connector
Helix Adapter Cable Helix Adapter Cable
Adapter Adapter
Cable Keyed Cable Keyed
Connector Connector
Plug into Plug into
Helix Fish Helix Fish
Finder Finder
minnkotamotors.com | 17