Publicité
Les langues disponibles
Les langues disponibles
Safety
Safety
General safety instructions
➜
Before commissioning and using the device, familiarize yourself with all the safety regula-
tions and occupational safety guidelines applicable at the place of use and observe them
at all times.
➜
Only operate the device if it is in faultless technical condition. In particular, ensure that
there is no visible damage on the device itself and, where applicable, on connected devices
or the supply connections.
➜
If there is missing or misleading information on the device or regarding occupational safety,
contact the responsible safety specialist or our technical service.
➜
Only use the device in accordance with the regulations on intended use („Intended use" on
page 81).
Electrical safety
➜
Before connecting the device to the power supply, ensure that the voltage indicated on the
rating plate matches the specifications of the local power utility company.
➜
Ensure that the power socket is protected by a residual-current device (RCD).
➜
Always use the 3-pole power cord supplied with the device (phase, neutral, ground).
➜
Prior to each start-up, check that the device and the power cord are free from visible
damage.
➜
Have repairs and/or maintenance work on the device carried out exclusively by an autho-
rized electrician or by the technical service department of Heidolph Instruments.
➜
Always switch the device OFF and disconnect it from the power supply before carrying out
maintenance work, cleaning, or repairs.
Data security
➜
The user is responsible for ensuring data security when transferring data between the
described device and other devices.
➜
Only use secure networks for the data transfer and avoid use of critical infrastructure.
➜
Only use high-quality shielded data cables for the data transfer.
➜
For data transfer via a USB B connection, an industrial standard USB hub should be prefe-
rably used to ensure the most stable connection possible.
Operational safety
➜
Operate the device under a closed ventilated fume hood when working with potentially
hazardous substances (see EN 14175 and DIN 12924).
➜
Do not make any unauthorized changes or modifications to the device!
➜
Only use genuine spare parts and accessories, or those expressly approved by the
manufacturer!
➜
Rectify malfunctions or faults on the device immediately.
➜
Shut down the device and disconnect it from the power supply if it is not possible to
eliminate the malfunction or rectify the fault immediately.
➜
Observe all other applicable regulations such as laboratory and workplace guidelines,
recognized safety technology rules and special local regulations.
83
Publicité
